Banded Belts

Banded Belts are made up from Classical, Wedge or Narrow belts with strong tie band over them. Each band may contain the required number of belts. Maximum up to 5 belts in one tie, depending upon the drive conditions, are recommended.

Features

Applications

Polydrive Banded belts are recommended on drives under the conditions of :-

Section Dimension (mm) Angle (mm) Pitch Width (mm) Belt Length Factor (mm) Standard Recommended Min
pulley diameter
Range
A
B
Deg. Wp
Lp to La
Li to Lp
Li to La
SPZ 10 8 40 8.5 13 37 50 IS 14261 67 710-4953
SPA 13 10 40 11.0 18 18 63 IS 14261 100 1320-9144
SPB 17 14 40 14.0 28 28 88 IS 14261 160 1320-13000
SPC 22 18 40 19.0 30 30 113 IS 14261 224 2550-12500