| Fractional Horsepower Standard |  |
 (2L-3L-4L-5L) Oil and heat resistant and static dissipating with cotton polyester outer cover. Ideal for any light duty fractional horsepower drives including backside idler applications. FHP V-Belts are measured on the outside diameter (Example 4L400=40"OD). |
| Fractional Horsepower Dry Fabric Wrapped V-Belts with Kevlar* Cord |  |
 (3L-4L-5L) Dry fabric wrapped FHP V-Belts with Kevlar cord are designed for use on most outdoor power equipment and agricultural equipment including lawnmowers-garden tractors- snowblowers and tillers. They are ideally suited for backside idler and clutching drive applications. An extra dry fabric wrapped cover in addition to the Kevlar cording allows the belt to dissipate heat and last longer than standard FHP belts. FHP V-Belts are measured on the outside circumference (Example 4L400=40"OD). |
| Conventional V-Belts |  |
 (A-B-C-D-E) JayDee Conventional V-Belts are constructed from pre-stretched polyester cord. They are oil and heat resistant and static dissipating. Recommended for all general purpose drives with higher horsepower ratings. Conventional V-Belts are measured on the inside diameter (Example A90 = 90"ID - 92"OD). |
| Conventional V-Belts with Kevlar* Cord |  |
 (A-B-C-D-E) JayDee Conventional V-Belts are constructed from Kevlar cord. They are oil and heat resistant and static dissipating. Recommended for all general purpose drives with higher horsepower ratings. Conventional V-Belts are measured on the inside diameter (Example A90 = 90"ID - 92"OD). |
| Narrow Wedge V-Belts |  |
 (3V-5V-8V) Recommended for all heavy duty drives requiring high horsepower and a compact design when space and weight are limiting factors. Oil and heat resistant and static dissipating. Narrow Wedge V-Belts are measured on the outside diameter. (Example 3V500=50"OD). |
| Conventional Rawedge Cogged V-Belts |  |
 (AX-BX-CX) Designed for the tough, small sheaves 1+3 high tension drives. Higher horsepower ratings make it possible to use power belts and thus fewer sheave grooves, resulting in lighter, more compact drives, reducing overall drive costs. |
| Narrow Wedge Rawedge Cogged V-Belts |  |
 (3VX-5VX) Recommended for all drives where compact design is required, higher speed is necessary and increased horsepower required. Heat and oil resistant, static conductive. All sizes are available from stock. |
| Double Sided V-Belts |  |
 (AA-BB-CC) Double Sided V-Belts are recommended for use in serpentine reverse bend drives or where a change in direction is required. All belts are oil and heat resistant and static dissipating. |
| Conventional Banded Belts |  |
 (RB-RC-RD) Banded conventional V-Belts are designed for heavy duty drives where shock loading is a problem and multiple matched single belts tend to roll over or jump off. |
| Narrow Wedge Banded V-Belts |  |
 (R3V-R5V-R8V) Banded Narrow Wedge V-Belts are designed for heavy duty drives where shock loading is a problem and narrow wedge belts tend to roll over or jump off. |
| Metric Narrow Wedge V-Belts |  |
 (SPZ-SPA-SPB-SPC) Metric Narrow Wedge V-Belts are manufactured for high performance. They are highly flexible, oil and heat resistant and static dissipating. |
| Timing Belts |  |
 (MXL-XL-L-H-XH-XXH) Recommended for mechanical power transmission drives where synchronization of driven speed to drive speed is required. Possible substitute for chain and gear drives. |
| Dual Timing Belts |  |
 (DXL-DL-DH) Recommended for the dual positive drive which is required to change the direction of one or more synchronous pulleys with one belt. The inside and outside teeth are identical in both size and pitch. |
| Variable Speed Belts |  |
 Recommended for use on variable speed sheave drives requiring exact speed control and maximum range of speed changes. Arched construction and strong compression section provide great crosswise rigidity that resists distortion. Oil and heat resistant, static conductive. |
| Polyvee Belts |  |
 (J-L-M) Recommended for small sheaves, high speed and/or high ratio drives, having longitudinally ribbed traction surfaces. Oil resistant and static conductive. |
| Narrow Wedge Cogged Banded |  |
 (R3VX-R5VX) Banded Narrow Wedge V-belts are designed for heavy duty drives where shock loading is a problem and narrow wedge belts tend to roll over or jump off. |
| Banded Kevlar* Cord V-Belts |  |
 (2L-3L-4L-5L) Oil and heat resistant and static dissipating with cotton polyester outer cover. Ideal for any light duty fractional horsepower drives including backside idler applications. FHP V-Belts are measured on the outside diameter (Example 4L400=40"OD). |
| Harvester Combine V-Bels |  |
Harvester v belts have been specifically designed for excellent performance under variable speed conditions.Their high tensile strength core caters for very low elongation under load while chloroprene as insulation rubber and wrapping fabric impregnator provide these belts with exemplary friction characteristics along with good oil-resistance and anti-static properties. These harvester belts / harvester v belts belts also came in pre set. |